Gemstone Cuff Bracelet
Whether you know how to make wire jewelry or not, this Gemstone Cuff Bracelet should be your next DIY jewelry project. While this free DIY jewelry tutorial does require you to know basic wire wrapping techniques, its clear instructions make this project doable even for a beginner at jewelry making. Therefore, learn how to make bracelet that is stylish, fun, and beautiful with this DIY bracelet tutorial. You will never want to take this chic cuff off your wrists once you make it. In fact, you will even have all your friends wanting you to make them one as well!
Project TypeMake a Project
Bead TypeGemstone
Time to CompleteIn an evening
Bead Technique UsedChainmail/Wirework
Bead Project TypeBracelet
Materials:
- Round Nose Pliers
- Wire Cutters
- Gold Cuff Bracelet (x1)
- Green Agate Slice (x1)
- Gold 24 Gauge Wire (x1)
- E6000® Glue (x1)
Techniques To Know:
- Wire Wrapping
Instructions:
1. Use E6000® to adhere the accent to the top center of the cuff. Allow the adhesive to dry thoroughly (according to manufacturers instructions) before adding the wire to prevent the agate from sliding on the cuff.
2. Cut a 36” length of gold wire.
3. Tuck one end of the wire between the gemstone and the cuff. Wrap the wire multiple times around the base of the gemstone.
4. Bring the wire up over the stone and down to one side and under the cuff, keeping the wire snug against the cuff. Continue wrapping the wire over the stone and under the cuff.
5. Tuck the end of the wire under the lip of the gemstone but not on the inside of the cuff. Apply additional adhesive to keep the wire in place.
6. Using round nose pliers, gently twist the wire along the top of the gemstone. The slight twisting tightens the wire on the gemstone.
If you like this project, be sure to download the free eBook, 13 Free Jewelry Patterns From Prima Bead, that it appears in!