Forever in My Heart Jewelry Set
Follow this tutorial to create a romantic Forever in My Heart Jewelry Set for a decorative and sophisticated addition to an evening outfit. Accented with twisted wire and bright beads, this filigree heart necklace, silver swirl earring pair, and circled silver bracelet is a Valentine's Day DIY jewelry set you'll love. Everything about this sweetheart set says "love," from the triple-heart pendant to the glowing mirror bead drops. We're in love with these DIY earrings, necklace, and bracelet, and we know you will be, too!
Project TypeMake a Project
Bead TypeMetal, Miscellaneous
Time to CompleteIn an evening
Bead Technique UsedChainmail/Wirework
Bead Project TypeNecklace, Bracelet, Earrings
Materials:
- 2 pk #34719059 145pc Starter Pack- Silver
- 1 pk #34708031 Metal Triple Heart Paisley Accent - 1pc
- 1 pk #34708224 45pc 5mm Metal Beehive Bead Silver
- 1 pk #34741043 70pc 4mm Bicone Mirror Beads - Red -Black
- 3 pk #34770313 Metal Silver Twist S Connector Chain, 7pc
- #6854 Needle Nose Pliers and Cutter - Precision Comfort
- #6858 Round Nose Pliers - Precision Comfort
Earring Instructions:
1. Separate the swirl connectors from each other.
2. Make a bead drop with a bicone/heart bead/bicone. Attach the drop to a swirl connector.
3. Using a jump ring, attach an ear wire to the other end of the same swirl connector.
4. Repeat steps 2-3 for the matching earring.
Bracelet Instructions:
1. Make 5 bicone bead links.
2. Separate the swirl connectors.
3. Alternate connecting the 5 bead links with 5 swirl connectors.
4. Use a 4mm jump ring to connect the bar half of a heart toggle after the last bead link and use a 4mm jump ring to connect the heart half of the toggle to the end swirl connector.
5. Make a bead drop with a bicone/heart bead/bicone. Use a 4mm jump ring to attach the bead drop to the heart toggle jump ring.
Necklace Instructions:
1. Make 14 bicone bead links.
2. Separate the swirl connectors from each other.
3. Use 4mm jump rings to connect the following, in order: bicone bead link, swirl connector, bicone bead link, swirl connector, etc. until you have connected 7 bicone bead links to 6 swirl connectors. Use a 4mm jump ring to connect the first bead link to the loop on the left side of the triple heart accent. Use a 4mm jump ring to attach the
last bead link to one half of a heart toggle.
4. Repeat step 3 on the other side of the three heart accent.
5. Slide a bicone, a metal heart bead, and a bicone onto a head pin and form a loop. Repeat this step to make six bead drops.
6. Use 6mm jump rings to connect a bead drop to the front of the 2nd, 4th, and 6th jump rings up from the loop on each side of the triple heart accent.