Rock On Thong DIY Bracelet
From the Blogger: "This Boho-inspired piece is a fun bracelet to wear anywhere! The Tierracast components, mixed with chain and oversized jump rings, provide all the materials for a simple yet interesting design. We have carefully "engineered" this piece to provide just the right amount of "drape" and movement. You can easily change the look of this design by simply changing the metal finish from antique to gold, bright silver, or even copper. You should be able to finish this piece in 1-2 hours."
Project TypeMake a Project
Bead TypeMetal
Time to CompleteIn an evening
Bead Technique UsedChainmail/Wirework
Bead Project TypeBracelet
Materials List
- 3 TierraCast Link Rock and Roll 3 Hole Bar - Antique Silver
- 7 inches Chain 7mm Etched Cable - Antique Silver
- 14 inches Chain 3mm Etched Cable - Antique Silver
- 3 Jump Ring 15mm 14g - Antique Silver
- 2 Jump Ring 10mm 14g - Antique Silver
- 1 TierraCast Clasp Lobster 15mm - Antique Silver
- 1 Eye Pin 2 inch 20g - Antique Silver
Rock On Thong DIY Bracelet
Handmade Bracelet Instructions
-
Cut the 7mm chain into two 7-link segments.
-
nts. Thread the eye pin through the top loop of a 3-hole bar and form a simple loop at the top.
-
Connect each of the two 7mm chain segments to each loop of the eye pin.
-
Cut the 3mm chain into two 12-link (3 ½ inches), two 10-link (3 inches) segments, and two 3 inch segments.
-
Open a 15mm jump ring and string on the bottom loop of the bar with the 7mm chain at the top, a 10-link chain segment, another bar, and another 10-link chain segment; close.
-
Repeat with the 12-link chain segments, adding the two 3 inch segments at the bottom of the ring to form a finger “ring.”